Your Premier Mobile Hospital Supplier
- Customized Mobile Hospital
- One Stop Solution for A Class Infectious Disease Hospital
- All the Medical Facilities and Equipment Can Be in the Package
- Fast Production and Installation
- 24/7 Technical & Sales Service
Your Reliable Partner and Mobile Hospital Manufacturer in China
Sunnyda is professional mobile hospital manufacturer in China, can provide a one-stop solution for general or infectious diseases hospital combined by container houses. Sunnyda engineers work with extensively experienced hospital design institute, with the medical expertise, our mobile hospital meets high standards.
Sunnyda mobile hospital combined by each 6055x2435mm module, this module can be free connected to create any space. Advantage to use uniform size is to save material cost as well as save installation time, fastest to build a hospital in 12 days. This module frame is 4mm galvanized and three times paint steel, wall and ceiling is insulated sandwich panel 60mm, floor is one piece medical grade PVC seamless, ceiling light is clean room sealed LED light, door and windows frame are aluminum.
All the wall corners and joint where wall meets ceiling, wall meets floor all covered by arc aluminum channel, convenient for clean and disinfection. Usually Sunnyda mobile hospital uses overall shower room, help avoid seepage. And using negative pressure sealed toilet to reduce waste water output.
Contact us today for any questions, our technical and sales team will try our best to support you!
- Gallery
- Data Sheet
| 1 | 20ft Dimension | External Size(mm) | 6058(L)×2438(W)×2791(H) |
| Internal Size(mm) | 5888(L)×2225(W)×2471(H) | ||
| Roof type | Flat roof with slightly slope. Roof drainage system | ||
| Floors allowed | ≤ 3 floors | ||
| 2 | Design specification | Lift span | 20 years |
| Floor live load | 2.5 KN/m² | ||
| Roof live load | 1.0 KN/m² | ||
| Wind load | 1.16 KN/m² | ||
| Seismic proof grade | 8 grade | ||
| 3 | Structure | Column | Galvanized cold roll steel, thk 3.0mm, Q235B |
| Primary roof beam | Galvanized cold roll steel, thk 3.0mm, Q235B | ||
| Secondary roof beam | Cold roll C steel, thk 1.5mm, Q235B | ||
| Primary floor beam | Galvanized cold roll steel, thk 4.0mm, Q235B | ||
| Secondary floor beam | Galvanized cold roll steel, thk 2.0mm, Q235B | ||
| Paint | 40μm epoxy zinc rich primer, 50μm chlorinated rubber topcoat | ||
| Maximum temperature | 500°C | ||
| Color | Any RAL color | ||
| 4 | Roof | Roof boarding | 0.5mm PPGI steel sheet, white grey |
| Insulation | 50mm mineral wool, 60kg/m3, fire rating A, non-inflammable | ||
| Ceiling | 50mm EPS sandwich panel (0.4mm PPGI/50mm EPS/0.4mm PPGI) Or rock wool | ||
| 5 | Floor | Flooring | 2.0mm PVC flooring, |
| Sub-floor | 18mm fiber cement, density≥ 1.3g/cm3 | ||
| Insulation(optional) | 75mm rockwool, 60kg/m3, fire rating A, non-inflammable | ||
| Base plate | 0.5mm PPGI steel sheet, white grey | ||
| 6 | Wall panels | Thickness | 60mm EPS sandwich panel, 0.4mm PPGI/60mm EPS/0.4mm PPGI, PE paint Color white |
| Insulation | 12kg/m3 EPS, | ||
| Option | 60mm rock wool sandwich panel, insulation 100kg/m3 rock wool, A grade fire rating, non-inflammable | ||
| 7 | Door (CE certificate) | Dimension | 2100x900mm |
| Insulation | 40mm rock wool | ||
| Material | Aluminum frame sandwich panel door | ||
| Qty | 1 pc | ||
| 8 | Window with rolling shutter (CE certificate) | Dimension | 800x1100mm |
| Frame material | UPVC | ||
| Glass | Double glazed toughened glass, 5+9A+5mm | ||
| Qty | 1 pc | ||
| 9 | Electricity | Electricity System | Different electrical standards to match with most countries in the world; such as CE, UL, CSA, AS, 220~250V |
| Electricity wire | Input wire 4mm2, stand type A/C wire 4mm2, wall type A/C wire 2.5mm2, switch 1.5mm2 | ||
| Socket | Fit for local standard, 3 pcs | ||
| Switch | 1 pc | ||
| LED light | Double 1200mm LED light, 2 pcs | ||
| 10 | Plumbing System (Option) | Clean Water | Φ20mm PPR |
| Waste water | Φ50mm&Φ110mm UPVC | ||
| 11 | Insulation test result | Floor | Thickness=80mm, U=0.25 W/m² K |
| Roof | Thickness=75mm, U=0.32 W/m² K | ||
| Wall panel | Thickness= 60mm,U=0.59 W/m² K | ||
| Window | Thickness= 5/9/5mm,U=1.4 W/m² K | ||
| 12 | Equipment | Hospital equipment | Sickbed, HVAC system, air conditioning system, high efficiency filter, pass box and much more according to customized |
Sunnyda Mobile Hospital
Sunnyda mobile hospital fully considered function of hospital, have complete departments like traditional hospital. Sunnyda has the capacity and experience to design and produce A class infectious disease hospital, medical facilities and equipment can be shipped together in packages.
Considered personnel flow in and out, mobile infectious disease hospital divided to semi-clean area, semi-contaminated area, and contaminated area, those 3 areas are clearly separated and has its own access. Buffer rooms are set between each area, and two doors of this room not allowed to open in same time, to keep pressure difference from two areas, also help the fire prevention. The patient compartment is equipped with fresh air system and exhaust air system, air pressure is 5Pa lower than other space.
Sunnyda mobile hospital can be delivered in one month, 4 modules are packed in a bundle shipped as a 20GP SOC. Equipment and other facilities can be loaded in sea container, we work with high standard medical equipment suppliers, can offer selected high quality medical equipment with CE FDA certificate.
Mobile Hospital: The Ultimate FAQ Guide
- Chapter 1: How do you Design Mobile Hospital Unit?
- Chapter 2: Can Mobile Hospital Manufacturer in China help in Design Process?
- Chapter 3: Are Mobile Hospitals Fully-made and Assembled in Factory or On-site?
- Chapter 4: What is the Cost of a Mobile Hospital Unit?
- Chapter 5: Which Amenities should Mobile Hospital Container have?
- Chapter 6: What are the different Layouts of Mobile Hospital Trailer?
- Chapter 7: Do Mobile Hospitals have Expandable Rooms?
- Chapter 8: What are the Safety Requirements for Mobile Hospital Container?
- Chapter 9: How many Departments can Mobile Hospital have?
- Chapter 10: Can you Install ICU Unit in Mobile Hospital Container?
- Chapter 11: Is there Medical Equipment you cannot install in Mobile Hospital Unit?
- Chapter 12: What are the Components of Mobile Hospital Unit?
- Chapter 13: How do you Relocate Mobile Hospital Unit?
- Chapter 14: What is the difference between Mobile Hospital and Field Hospital?
- Chapter 15: Does Mobile Hospital Manufacturer in China offer Warranty?
- Chapter 16: How can you Power Mobile Hospital Unit?
- Chapter 17: How do you Manage Waste in Mobile Hospital?
- Chapter 18: Does Sunnyda support OEM Mobile Hospital Business?
- Chapter 19: How do you Clean and Maintain Mobile Hospital Unit?
Mobile hospitals have become a trend in the recent times.
They are not only used by the military, but also under resourced nations, general populations and during man-made and natural disasters.
Today’s guide has answers to questions you have been asking about mobile hospitals – from design, material, fabrication process, features, safety and quality compliance, just to mention a few.
Let’s get started:
What is a Mobile Hospital?
These are mobile medical units attached to create a larger hospital facility.
This facility can avail on site medical treatment during circumstances such as civil unrest, natural disasters, warfare operations or remote areas among others.
Mobile hospitals can be moved and stationed in specific places swiftly with ease due to its modular property.
Also, mobile hospitals have efficient medical space depending on the size as well as purpose of each unit.
Figure 1 Mobile hospital
What Materials are suitable for Mobile Hospital?
There are two main materials used in manufacturing mobile hospital:
· High Quality Steel
You can use sheets of hard steel to manufacture mobile hospitals.
Steel is durable, high tensile strength, flexible and easy to use. Sunnyda mobile hospital use galvanized and painted steel frame.
· Fiber Glass Sandwich Panel
Also, you can use fiberglass sandwich panel, with insulated material EPS, PU or XPS.
Fiberglass is lightweight, durable, flexible, and with high tensile strength.
Are Mobile Hospitals Container Customizable?
Absolutely, yes.
They are customized to meet the needs and specifications of customers.
The layouts as well as designs of the mobile hospital are chosen by the client.
Figure 2 Mobile hospital floor layout
What Standards should Mobile Hospital Trailer conform to?
Of course, each country has an organization or body that regulates the health care system.
In America, a mobile hospital must conform to the healthcare standards and codes for stationery hospitals.
Also, mobile hospital must meet ISO 9001 Standards.
The equipment and trailer house parts are CE Certified.
Companies manufacturing mobile hospital trailers must also be ISO9001 and ISO14001 certified. Manufacturers who are SGScertified also adhere to strict quality control. They can be used to manufacture mobile hospitals.
However, manufacturers should adhere to the following standards:
- There should be constant power to aid in running of the hospital as well as medical equipment. Power is needed for air-conditioning as well as running ICU operations among others.
- There has to be a flat floor design to aid in easy movement of people.
- The mobile hospital has to be properly ventilated to allow for free air circulation.
- The units must have separate patient and staff toilets.
- A fire alarm system must be available with staff working 24/7.
What are the Advantages of Mobile Hospital?
Some of the advantages of mobile hospitals are:
i. Convenience
They can be integrated into existing stationery facilities.
A mobile hospital can be redeployed in different locations and relocated once the need is fulfilled.
It can be easily assembled and disassembled thus being ready to use.
ii. Comes with Additional Amenities
Mobile hospitals are designed in such a way that they have among others.
These features make them ideal for use in remote areas.
iii. Quality and Reliable
They are high quality and reliable. They can last for more than 40 years of continuous usage. Also, they meet the healthcare and ISO Certified standards of quality.
iv. Function
Can be used in place of stationery hospitals to provide most medical services.
v. Value
Mobile hospitals are of high value, meeting the needs of the client.
vi. Time Efficient
A mobile hospital can be designed, manufactured, delivered, set-up as well as operational within a short period of time.
Stationery hospitals on the other hand take long periods to build.
vii. Can be Customized
Mobile hospitals can be customized to meet the needs of a client as well as the set standards. For example, you can have modular and expandable designs.
Modular designs are better if the goal is to achieve future expansions of the hospital.
Who benefits of Mobile Hospital Services?
Patient populations in remote areas without stationery hospitals.
- Military in war torn areas.
- People affected by natural disasters.
- Increased number of patients which occur as a result of high population growth.
- Government personnel.
- General populations.
Do Mobile Hospitals have Limitation on Shape and Size?
Figure 3 Mobile radiography trailer
No.
Since the mobile hospitals are modular, they can come in different sizes and shapes.
They can be small or large depending on the needs of the client.
What is the History of Mobile Hospitals?
Mobile hospital is considered to be generalized and advanced form of mash as well as operational and more efficient form of a field hospital.
The idea of Mash was invented by the American army.
Official operation in battlefields was in August 1945. There was a need for on-site medical services by the injured soldiers, hence Mash was developed.
Field hospital was later developed, however, it could not be used in harsh conditions. Also, field hospitals could not offer surgical services hence the need for mobile hospitals.
What are the Features of Mobile Hospital?
A mobile hospital includes corridors, utility areas and medical spaces.
Figure 4 Mobile medical hospital
· Corridors
The corridors are standard sized trailers with multiple doors to connect to corridors or other units through a specific connector.
This specific connector comes in different forms. It can be an open gangway connection, inflatable structure or tent.
· Utility
Utility section consisted of the welfare and accessories area, service offices and units, and important utilities.
These facilities include a laundry room, kitchen, nurses and doctors dorm, administrative offices and mechanical facilities among others.
The spaces as well as equipment are housed in a standard size trailer.
· Medical Section
This section is placed in semi-trailer boxes with expanding ability. These are special medical sections different from the utility sections.
Other things installed for efficient use of space are receptionist desk, technical rooms, closets and cabinets.
Basically, mobile medical hospital has all facilities and features of standard hospitals.
How do you Design Mobile Hospital Unit?
Mobile hospitals are designed based on the type of treatments to be offered to patients in specific locations:
Level 1 mobile hospital – is smaller in size with a small bed capacity. It is designed into three key areas: observation area, treatment and surgery as well as resuscitation area.
A mobile level 2 – has an admin area, 1 pharmacy, 2 outpatient consultations rooms, a radiology room, laboratory, emergency/recovery room, intensive care unit among others.
This hospital links with other areas through a central corridor.
A mobile hospital level 3 – offers more special medical services. They offer the level 2 services as well as several specialty surgical services.
There is triage, resuscitation, followed by surgery and post-op medical care. This mobile hospital is larger in capacity than the level 2 mobile hospital.
The designs also vary depending on the geographic location of use or the purpose.
Can Mobile Hospital Manufacturer in China help in Design Process?
Yes.
Mobile hospital manufacturers in China can help in design process if they are ISO Certified and also adhere to the set quality standards.
Are Mobile Hospitals Fully-made and Assembled in Factory or On-site?
Mobile hospitals are fully-made as well as assembled in factory.
What is the Cost of a Mobile Hospital Unit?
The cost of a mobile hospital unit is competitive.
The cost of a mobile trailer depends on a number of factors:
Location of purchase – if a mobile hospital is purchased from the manufacturer, it is cheaper because of discounts as well as economy of scale.
Features – a mobile hospital with more complex features will be costlier.
Customization – a customized mobile hospital is costlier than a standard one.
Size – The cost varies with size. Manufacturer’s standard size may cost less, and customized size may cost higher.
Which Amenities should Mobile Hospital Container have?
Figure 5 Mobile hospital container
These amenities range from communication serving, bathrooms, toilets and laundry among others.
A staff dormitory to house the staff tending to the patients.
There is a gift shop where you can purchase magazines, gifts, toiletries, cards or flowers.
What are the different Layouts of Mobile Hospital Trailer?
You should consider any of the following options:
· Modular Mobile Hospitals
Modular mobile hospitals can be used in different combinations or independently.
With a modular layout, a client can decide the number of people to treat or the types of medical services to be provided to patient populations.
There are different medical units which are then combined together to form a hospital.
· Mobile Trailer Hospitals
This is a single trailer which is then subdivided into different medical units and equipment are installed in every unit.
The units are mounted on trailers and easily moved by trucks. They are either standard shapes or expandable structures.
Do Mobile Hospitals have Expandable Rooms?
Yes.
The rooms are expandable as they can be easily added to the facility.
The modular property ensures that rooms can be expanded when needed.
Figure 6 Expandable mobile hospital
What are the Safety Requirements for Mobile Hospital Container?
There should be protection from for those patients entering the mobile unit. There has to be a connector which links the mobile hospital to a host facility or structure.
Site utilities have to be self-contained within the mobile hospital. These site utilities include mechanical, electrical and plumbing systems.
There has to be excellent ventilation and filtration systems in the mobile hospitals.
A fire-alarm system together with a pull station has to be located inside the mobile unit with a connection to a staff that works 24 hours.
Depending on the location of a site, there has to be freeze protection.
Gas rooms are also located strategically to avoid any potential accidents.
Medical gas rooms exist in each room of the mobile hospital. Every medical gas station provides integrated medical air and oxygen.
For patient safety reasons, there is an optional wheel chair ramp which is connected to other mobile hospital units providing god accessibility to the facility.
Patients can also quickly call for help when in need through using the nurses’ call system. As such, there should be an efficient communication system in the mobile hospital units.
How many Departments can Mobile Hospital have?
A mobile hospital can have several departments such as those of a permanent hospital.
However, the most essential departments for mobile clinic are:
- Emergency and Accident department
- General Surgery Department
- Triage
- Trauma
- Pharmacy
- Ward Section
- Laboratory
- Medical Imaging Department
- Triage and Trauma
- Anesthetics
- General or Specialist Clinics
- Admissions
- General Services
Can you Install ICU Unit in Mobile Hospital Container?
Yes.
In fact, one of the essential sections of a mobile hospital is ICU unit.
A mobile hospital has stable power which can be used to operate the various ICU equipment.
Figure 7 Mobile IC Unit
Is there Medical Equipment you cannot install in Mobile Hospital Unit?
No.
All medical equipment required for use in different departments are installed in the mobile hospital.
What are the Components of Mobile Hospital Unit?
The components of mobile hospital unit are:
- Water pipes
- Electrical system
- Toilet and sewerage system
- Communication system
- Treatment rooms
- Corridors that connects different units together
- The base platform of a mobile hospital unit is box of a semi-trailer or rear box of a truck.
How do you Relocate Mobile Hospital Unit?
Mobile hospital unit can be relocated through use of trucks or trailers.
Also, the mobile hospital unit can be disassembled and its parts transported through plane, road or ships.
Figure 8 Truck relocating mobile hospital
What is the difference between Mobile Hospital and Field Hospital?
While the structure of field hospital is a container and tent, that of a mobile hospital is ambulances, trucks, semi-trailers, buses or trailer.
For a field hospital, all of the medical equipment as well as tents are stored in a container then transported via different means to the site of operation.
A field hospital is transportable, while a mobile hospital is portable.
The tent used for field hospital is made of tarpaulin and fabric. On the other hand, the materials used to make the body of a mobile hospital is combination of thermal insulation layer and sheets of fiberglass or steel.
Compliance with health protocols as well as hygienic decontamination in mobile hospitals is better than in field hospitals. Additionally, the cooling and heating systems in mobile hospitals are better than in field hospitals.
A mobile hospital provides the needed efficiency in harsh conditions. Field hospitals on the other hand do not provide this key efficiency due to the material used as well as structure.
Does Mobile Hospital Manufacturer in China offer Warranty?
You know China is the leading manufacturer of mobile hospitals.
Manufacturers are willing to provide the best deals for their customers. And, one such way is through offering warranty for their mobile hospitals.
They offer 1-year warranty.
How can you Power Mobile Hospital Unit?
Mobile hospital units can be powered using generators where there is no accessibility to electricity.
Also, they can be powered using main electricity supply from the site of operation.
Mobile hospital units are powered through either of these mentioned means. It all depends on what is available at the site of operation.
Also, solar power can also be used where it seems viable.
How do you Manage Waste in Mobile Hospital?
Waste is discharged into a storage tank in the hospital unit or into the host facility’s sewage. This way, there is limited contamination within the mobile hospital units.
Also, there are waste trucks in which waste is discharged into before they are taken to specific places where the waste is disposed off.
Does Sunnyda support OEM Mobile Hospital Business?
Yes, we do.
Sunnyda helps in various ways ranging from:
Design – Sunnyda being a manufacturing company helps OEM in producing different designs of mobile hospitals which meet the needs of clients.
Fabrication – once OEM has manufactured the original parts of the mobile hospital Sunnyda fabricates them ready for use for the final project.
Branding – Sunnyda helps build OEM brand by creating awareness about their products to potential clients.
Shipping – Sunnyda ships the original parts manufactured by OEM to countries of production as well as sale.
Cost savings – Sunnyda supports OEM mobile hospital business by buying their products in large scale/bulk. When this happens, OEM saves on their costs as their cost of production is lowered due to economies of scale.
How do you Clean and Maintain Mobile Hospital Unit?
There are trained staff who clean the various mobile hospital units.
The staff wear protective gears such as gloves and clean starting with high-touch areas such as door knobs, rails.
They use alcohol as ammonium to clean the surfaces of the units together with a soft clothing.
The protective gear and cleaning materials must be changed to avoid cross-contamination.
After cleaning, mobile hospital units are disinfected and sterilized using disinfectants such as hydrogen peroxide, chlorine compounds and sterilized using alcohol.
The floor of the mobile hospital unit is cleaned using water and soap. A hygiene staff mops the floor using a soft clothing.
Labeled bins are placed at strategic locations at every mobile hospital unit. For instance, in a patient ward, there is a bin to dispose off waste.
In a surgical ward, there is bin to throw off any used surgical materials. In the admin area, there are bins to dispose of papers or other waste.
Through these bins, there will be reduced littering and contamination within the hospital units as well as maintenance of cleanliness.
If you consider every aspect in this guide, you will definitely get high quality mobile hospital.
At Sunnyda, we offer cost effective solutions in mobile hospital fabrication.
Whether you need standard or custom mobile hospital units, we are here to offer cost effective options – contact us now.